FM-200 Series Laminated Foam/Metal Wall Panel System

Protean's FM-200 Series panel systems are laminated in vacuum presses. Our foam panels use only pre-cured rigid insulation boards cut from bunstock. The polyisocyanurate foam is poured in bunstock form and allowed to fully cure before cutting into slabs and laminated into panels this eliminates the gas blistering often common with foamed-in-place panels. This also creates the superior flatness of the laminated foam panels and allows for smooth non-textured panel surfaces at no additional cost. In addition to the smooth finished panels embossed surfaces are also available.

Unlike some of our competitors we do not have the limitations of "standard modules" 24", 30", 36"...
Variable widths available up to 55" are standard and as many different sizes as the project requires are available at the same competitive price.

In addition to offering a polyisocyanurate core Protean offers an EPS - Expanded Polystyrene core with similar qualities at a less expensive price. Both foam core panels are available in panel thicknesses of approximately 1" up to 6" with a standard thickness of 2".

See our column cover page for more information on column covers to match or accent your panel system.

Face and Liner Materials FM-200 Laminated Foam Panel Systems

• Steel (22 Ga. Standard with other thicknesses available) Kynar 500 finishes as required. Smooth or Embossed
• Aluminum (.040 thick Aluminum with .050-.063 available) Kynar 500 and anodized finishes. Smooth or Embossed
• Stainless Steel (22 Ga. Standard with other thicknesses available) Polished or Brushed

Cores

• Polyisocyanurate urethane (R-value of approximately 5.9 per inch of thickness)
• EPS Expanded Polystyrene (R-value of approximately 5 per inch of thickness)

Panel Size limitations

• Maximum panel lengths Approx. 24'-0"
• Maximum panel width Approx. 55" based on 2" panel thickness (varies with panel thickness)

Design Assistance

HC-200 Series Laminated Honeycomb/Metal Wall Panel System

Protean's HC-200 Laminated Honeycomb metal wall panels offer perhaps the flattest panel system available in the market today. The skins are laminated in a vacuum press to the honeycomb ensuring extreme flatness and greater composite strength. In addition to the phenomenal strength of the composite panels the product is extremely light weight. In fact, the average Protean laminated panel weights approximately 3 pounds per square foot significantly reducing the size, weight and cost of the supporting structure.

See our column cover page for more information on column covers to match or accent your panel system.

Face and Liner Materials HC-200 Laminated Honeycomb Panel Systems

• Steel (22 ga Standard with other thicknesses available) Kynar 500 finishes as required, smooth or embossed.
• Aluminum (.040 thick Aluminum with .050-.063 available) Kynar 500 and anodized finishes, smooth or embossed.
  (Aluminum skins are not available from foam-in-place manufacturers)
• Stainless Steel (22 ga Standard with other thicknesses available), polished or brushed.

Cores

• Aluminum Honeycomb
• Kraft Paper Honeycomb

Panel Size limitations

• Maximum panel lengths Approx. 24'-0"
• Maximum panel width Approx. 55" based on 2" panel thickness (varies with panel thickness)

Design Assistance

FM-210 Series Laminated Foam/Metal Wall Panel System

Protean's FM-210 Series similar to the 200 series is laminated in vacuum presses. Our foam panels use only pre-cured rigid insulation boards cut from bunstock. The polyisocyanurate foam is poured in bunstock form and allowed to fully cure before cutting into slabs and laminated into panels this eliminates the gas blistering often common with foamed-in-place panels. This also creates the superior flatness of the laminated foam panels and allows for a smooth non-textured panel surfaces at no additional cost. In addition to the smooth finished panels, embossed surfaces are also available.

This system offers an excellent means of obtaining custom insulated spandrel panels designed to be installed to the structure with mechanical fasteners as a 5/8" gasketed joint system with aluminum extrusions to receive extruded silicone gaskets. Typically fabricated at a thickness of 2", panels may be fabricated to a thickness of 6", offering a maximum R value of 35, although the gasket would become recessed. In addition to offering a polyisocyanurate core we offer an EPS - Expanded Polystyrene core with similar qualities at a less expensive price.

See our column cover page for more information on column covers to match or accent your panel system.

Face and Liner Materials FM -210 Laminated Foam Panel Systems

• Steel (22 Ga. Standard with other thicknesses available) Kynar 500 finishes as required. Smooth or Embossed
• Aluminum (.040 thick Aluminum with .050-.063 available) Kynar 500 and anodized finishes. Smooth or Embossed
• Stainless Steel (22 Ga. Standard with other thicknesses available) Polished or Brushed

Cores

• Polyisocyanurate urethane cores (R-value of approximately 5.9 per inch of thickness)
• EPS Expanded Polystyrene (R-value of approximately 5 per inch of thickness)

Panel Size limitations

• Maximum panel lengths Approx. 24'-0"
• Maximum panel width Approx. 56" based on 2" panel thickness (varies with panel thickness)

Design Assistance