Our 210 Series Metal Wall Panel Systems are designed and installed utilizing extruded silicone gaskets to seal the system in lieu of wet-sealed alternatives. Our 210 Series Panels are a Laminated Metal Wall Panel Systems, laminated in our unique dead flat platen vacuum presses using either insulation board or honeycomb core material.

This insulated metal wall panel system is designed to be installed to the structure with mechanical fasteners through the extruded aluminum perimeter frame that receives the 5/8” extruded silicone gaskets to seal the wall panel system. The exterior panel skins & interior panel liners are formed on press brakes, ensuring crisp lines and offering greater dimensional flexibility. The skins and the cores are then laminated on a dead flat platen vacuum press table ensuring extreme flatness and greater strength, the final result is a laminated metal wall panel with greater span capacity.

Our 220 Series Metal Wall Panel Systems are designed and installed utilizing a combination of our “rainscreen” principle panel system and gasket at the joints of the panel. The tongue and grove joint enables the metal wall panels to be installed both horizontally and vertically using concealed fasteners. When installed in the horizontal position, the joint system with interlocking tongue and groove, which provides a natural method of shedding water preventing the water from penetrating the exterior skin of the building.

The exterior panel skins are formed on press brakes, ensuring crisp lines and offering greater dimensional flexibility, while the interior liner skins are roll-formed, increasing productivity. The skins and the cores are then laminated on a dead flat platen vacuum press table ensuring extreme flatness and greater strength.