Our AP-3000RS Rain-screen Aluminum Wall Panel system is our extruded frame rainscreen panel system. All metal wall panel corners in this system are tight fitting non-welded, with an option for welded and ground smooth. Our AP-3000RS Aluminum Panel system can be installed as a drained/back-ventilated system or can be modified to install as a pressure equalized rainscreen system. The standard panel joints are 9/16” typical with aluminum extruded frame typical 1 ½” Depth panel system. Aluminum Wall Panels are reinforced with stiffeners as required by design loads to meet deflection criteria as well as eliminating the possibility of deformation. The aluminum wall panels can be custom painted to match or contrast other material on the project if required.

Utilizing Protean’s standard installation details the AP-3000RS series metal wall panels are sequentially installed to the structure with hidden mechanical fasteners covered by spline material at the joints.

Our AP-3000RS Rainscreen Aluminum Wall Panel System is backed by and requires a proper Air/Water barrier to be designed and installed as with any rainscreen panel system.

See our Aluminum column cover page for more information on our column covers and beam wraps to match or accent your metal panel system.

Panel Features:

Face Materials AP- 3000RS Rainscreen Panel Systems

  • .125 Aluminum Skins
  • .090 Aluminum Skins Optional (Anodized finishes may be limited in width due to availability of 5005 material)
  • Other Optional Skins may be available please call Protean

Finishes Available

  • 70% Kynar 500 Spray Coatings carrying a standard ten (10) year warranty (20 year option available)
  • Optional Spray finishes are available please call protean
  • Class I (Clear, Bronze, Black, Med Bronze & Champagne) Batch Anodized with a Standard 5 year finish warranty
  • Class II (Clear) Batch Anodized with a Standard 5 year finish warranty
  • Other finishes are available please call Protean

Joints

  • Standard Vertical Joint 9/16” Spline joint
  • Standard Horizontal Joint 9/16” Spline Joints
  • Joint widths will vary depending on the material thickness of the skin

Panel Size limitations

  • Maximum panel lengths Approx. 16′-0″
  • Maximum panel width 58″
  • 1 ½” Standard System depth

Panel Design Configurations

  • Square or Rectangular Flat Panels
  • Geometric Shaped Panels – Triangular or Trapezoidal
  • Bent Panels – Corner panels or Multiple Bend Fascia Panels
  • Curved or Radius Panels may be available please consult Protean