HC-200 Rainscreen-Style System

Honeycomb Metal Panels (HMP)

The HC-200 Series is a rain screen style system best used when dead flat surfaces are desired. Honeycomb core panels are well suited for projects needing large panels with long, smooth expanses. The rain screen style construction creates a crisp aesthetic with no caulk lines.

Materials of Construction

Face: 0.040” Aluminum (Coil Coated)
Liner: 0.040” Aluminum (Primer Coat)
Core: 1.00” AL Honeycomb
Core: Kraft Paper
Options:
• 22Ga Galvanized Steel
• 20 Ga Stainless Steel,
• Face/liner thicknesses to 0.040”-0.090”
• Core thickness 1” to 6”

Coatings and Colors

Standard: 2-coat Kynar 500 Finish
Options: Anodized, brushed stainless, Mica, metallic, 3-coat, non-directional embossed, exotic colors.

Panel Sizes

Maximum Panel Width: 57” (based upon 1” core)
Optimal Widths: 20”, 26”, 44” and 56” (for lowest cost)
Maximum Length: 16’
Optimal Length: <16’
System Depth: 1.0” (Standard)

Markets

Civic Buildings, Educational Buildings, Government Buildings

Downloads

Panels Design Configurations

Rectangular or Square Flat Panels
Geometrically Shaped Panels
Bent Panels – Corner Panels, Copings
Multiple Bends – Fascia Panels
Curved or Radius Panels

Joints-Rainscreen Type Principal

½” Dry Joint, Vertical & Horizontal
Panel Weights (Approximate)
• 1.264 #/SF (Standard 0. 040 Aluminum)
• 2.934 #/SF (22 Ga Galvanizied)
• 3.17 #/SF (20 Ga Stainless Steel)

Testing Information Available

Air Infiltration: ASTM E-283-91 (99)
Structural: ASTM E -330-97 el
Water Penetration: ASTM E-331-00
Weathering: ASTMD-2247
Surface Burning Characteristics: ASTM E-84-05

Installation

Utilizing standard installation details, HC-200 series panels are sequentially installed to the structure with mechanical fasteners with an easy tongue and grove alignment. We recommend use of hat girts and self-tapping screws; however, our panels can be fastened to flat strap furring or direct to 5/8” or heavier plywood.

Warranty

1 Year Workmanship
& 10 year finish