Phone-square-alt Linkedin

HC-2000RS Pressure Equalized Rainscreen System

Honeycomb Metal Panels (HMP)

The HC-2000RS Series is an AAMA 508-Certified true rainscreen system best used when a project requires long, smooth expanses and dead flat surfaces. Configured as a pressure equalized rainscreen, HC-2000RS panels do not require sealants or exposed fasteners. These HMPs are constructed with non-combustible materials for NFPA-285 applications. Aluminum skins, core and liner make them infinitely recyclable.

Materials of Construction

  • Face: 0.040” Aluminum (Coil Coated)
  • Liner: 0.040” Aluminum (Primer Coat)
  • Core: 1.00” AL Honeycomb
  • Options:
    • 20 Ga Stainless Steel,
    • Face/liner thicknesses to 0.040”-0.090”
    • Core thickness 1” to 6”

Coatings and Colors

  • Standard: 2-coat Kynar 500 Finish
  • Options: Anodized, brushed stainless, Mica, metallic, 3-coat, non-directional embossed, exotic colors.

Panel Sizes

  • Maximum Panel Width: 57” (based upon 1” core)
  • Optimal Widths: 20”, 26”, 44” and 56” (for lowest cost)
  • Maximum Length: 16’
  • Optimal Length: <16’
  • System Depth: 1.0” (Standard)

Markets

  • Civic Buildings, Educational Buildings, Government Buildings

Downloads

Panels Design Configurations

  • Rectangular or Square Flat Panels
  • Geometrically Shaped Panels
  • Bent Panels – Corner Panels, Copings
  • Multiple Bends – Fascia Panels
  • Curved or Radius Panels

Joints – Dry Joint Rainscreen

  • ½” Dry Joint, Vertical & Horizontal
  • Panel Weights (Approximate)
    • 1.264 #/SF (Standard 0. 040 Aluminum)
    • 3.17 #/SF (20 Ga Stainless Steel)

Testing Information Available

  • Pressure Equalized Rainscreen: AAMA 508-14
  • Air Infiltration: ASTM E-283-91 (99)
  • Structural: ASTM E -330-97 el
  • Water Penetration: ASTM E-331-00
  • Weathering: ASTMD-2247
  • Surface Burning Characteristics: ASTM E-84-05
  • Missile Impact: E1886
  • Hurricane Debris: E1996

Installation

Utilizing standard installation details, HC-2000RS series panels are sequentially installed to the structure with mechanical fasteners with an easy tongue and grove alignment. We recommend use of hat girts and self-tapping screws; however, our panels can be fastened to flat strap furring or direct to 5/8” or heavier plywood.

Warranty

1 Year Workmanship
& 10 year finish

VERSATILITY TO REALIZE YOUR VISION

Contact Us
Phone-square-alt Envelope

Protean Construction Products, Inc.
11901 Riverwood Dr.
Burnsville, MN 55337
952.895.4000
(Fax) 952.895.1691
info@protean.com

Protean Construction Products, Inc. • 11901 Riverwood Dr. • Burnsville, MN 55337 952.895.4000 • (Fax) 952.895.1691 • info@protean.com