FM-200 Rainscreen-Style System

Insulated Metal Panels (IMP)

The FM-200 Series is a rain screen style system best used when high R-Value or noise deadening is required. Panels tested to R-Value = 14 (7 per inch of depth). Laminated foam panels are well suited for projects needing large panels with long, smooth expanses. The FM-200 is best when a crisp aesthetic with no caulk lines and insulation qualities are desired.

Materials of Construction

Face: 0.040” Aluminum (Coil Coated)
Liner: 0.040” Aluminum (Primer Coat)
Core: 2.00” Polyisocyanurate
Options:
• 22 Ga Galvanized Steel
• 20 Ga Stainless Steel,
• Face/liner thicknesses to 0.040”-0.090”
• Core thickness 1” to 6”

Coatings and Colors

Standard: 2-coat Kynar 500 Finish
Options: Anodized (not recommended), brushed stainless, Mica, metallic, 3-coat, non-directional embossed, exotic colors.

Panel Sizes

Maximum Panel Width: 54” (based upon 2” core)
Optimal Widths: 18”, 24”, 42” and 54” (for lowest cost)
Maximum Length: 16’
Optimal Length: <16’
System Depth: 2.0” (Standard)

Markets

Civic Buildings, Educational Buildings, Government Buildings

Downloads

Panels Design Configurations

Rectangular or Square Flat Panels
Geometrically Shaped Panels
Bent Panels – Corner Panels, Copings
Multiple Bends – Fascia Panels
Curved or Radius Panels – limited

Joints-Rainscreen Type Principal

½” Dry Joint, Vertical & Horizontal
Panel Weights (Approximate)
• 1.233 #/SF (Standard 0. 040 Aluminum)
• 2.653 #/SF (22 Ga Galvanizied)
• 3.17 #/SF (20 Ga Stainless Steel)

Testing Information Available

Air Infiltration: ASTM E-283-91 (99)
Structural: ASTM E -330-97 el
Water Penetration: ASTM E-331-00
Thermal: ASTM C1363 (2” = R-14)
Weathering: ASTMD-2247
Surface Burning Characteristics: ASTM E-84-

Installation

Utilizing standard installation details, FM-200 series panels are sequentially installed to the structure with mechanical fasteners with an easy tongue and grove alignment. We recommend use of hat girts and self-tapping screws; however, our panels can be fastened to flat strap furring or direct to 5/8” or heavier plywood.

Warranty

1 Year Workmanship
& 10 year finish